simplified parameter.in files

dune/fem-dg/test/advdiff/parameter.in

@@ -2,6 +2,7 @@
 #------------
 
 fem.prefix: ${CMAKE_CURRENT_SOURCE_DIR}/data # specify directory for data output (is created if not exists)
+fem.prefix.input: ${CMAKE_CURRENT_SOURCE_DIR}
 fem.io.datafileprefix: heat # prefix data data files 
 fem.io.savestep: 0.1 # save data every time interval 
 fem.io.savecount: -1 # save every i-th step
@@ -18,7 +19,7 @@ gridsol.filename: heat-checkpoint
 # GENERAL
 #--------
 
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramBase
+paramfile: ../parameter/paramBase
 
 
 # PROBLEM SETUP
@@ -40,13 +41,13 @@ femhowto.zvelocity: 0.    # the only advection part for the linear heat eqn
 # DOMAIN
 #-------
 
-fem.io.macroGridFile_1d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/unitcube1.dgf
-fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/unitcube2.dgf
-fem.io.macroGridFile_3d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/unitcube3.dgf
+fem.io.macroGridFile_1d: ../grids/unitcube1.dgf
+fem.io.macroGridFile_2d: ../grids/unitcube2.dgf
+fem.io.macroGridFile_3d: ../grids/unitcube3.dgf
 
 
 # SOLVER
 #-------
 dgdiffusionflux.upwind: -1 -0.001
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramSolver
+paramfile: ../parameter/paramSolver
 femhowto.maxTimeStep: 0.5

dune/fem-dg/test/euler/parameter.in

@@ -22,6 +22,7 @@ femdg.limiter.indicatoroutput: true
 #------------
 
 fem.io.path: ${CMAKE_CURRENT_SOURCE_DIR}/data/euler
+fem.prefix.input: ${CMAKE_CURRENT_SOURCE_DIR}
 fem.io.datafileprefix: RC
 fem.io.savestep: 0.01 # SaveStep (write data every `saveStep' time period, <=0 deactivates)
 fem.io.savecount: -1 # SaveCount (write data every saveCount time steps, <=0 deactivates)
@@ -38,7 +39,7 @@ gridsol.filename: straka-checkpoint
 # GENERAL
 #--------
 
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramBase
+paramfile: ../parameter/paramBase
 
 femhowto.eocSteps: 3
 problem.verboserank: 0
@@ -47,7 +48,7 @@ problem.verboserank: 0
 # PROBLEM SETUP
 #--------------
 
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramPhysicalConstants
+paramfile: ../parameter/paramPhysicalConstants
 
 g: 1. # gravity force [m/ss]
 femhowto.startTime: 0.
@@ -71,13 +72,13 @@ r: 0.25 # radius of perturbation ball
 # DOMAIN SETUP
 #-------------
 
-fem.io.macroGridFile_1d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/unitcube1.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/unitcube2.dgf
-fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/grid2d_str1d.dgf
-fem.io.macroGridFile_3d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/unitcube3.dgf
+fem.io.macroGridFile_1d:  ../grids/unitcube1.dgf
+#fem.io.macroGridFile_2d: ../grids/unitcube2.dgf
+fem.io.macroGridFile_2d:  ../grids/grid2d_str1d.dgf
+fem.io.macroGridFile_3d:  ../grids/unitcube3.dgf
 
 
 # SOLVER CONFIGURATION
 #---------------------
 
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramSolver
+paramfile: ../parameter/paramSolver

dune/fem-dg/test/navierstokes/parameter.in

@@ -10,6 +10,7 @@
 #------------
 
 fem.prefix: ${CMAKE_CURRENT_SOURCE_DIR}/data
+fem.prefix.input: ${CMAKE_CURRENT_SOURCE_DIR}
 fem.io.datafileprefix: NS
 fem.io.savestep: 0.01 # SaveStep (write data every `saveStep' time period, <=0 deactivates)
 fem.io.savecount: -1 # SaveCount (write data every saveCount time steps, <=0 deactivates)
@@ -22,7 +23,7 @@ femhowto.additionalvariables: false
 # GENERAL
 #--------
 
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramBase
+paramfile: ../parameter/paramBase
 
 
 # GRID SOLUTION 
@@ -36,7 +37,7 @@ gridsol.filename: nseq-checkpoint
 # PROBLEM SETUP
 #--------------
 
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramPhysicalConstants
+paramfile: ../parameter/paramPhysicalConstants
 
 # WBPROBLEM
 # g: 0.7 # m/(ss)
@@ -58,18 +59,18 @@ kGNS: 3.1415926535897932385
 # DOMAIN CONFIGURATION
 #---------------------
 
-fem.io.macroGridFile_1d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/nswaves_1d.dgf
-fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/nswaves_2d.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/mesh4_1_2.typ1.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/mesh4_1_1.typ1.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/nswaves_2d_unstr.dgf
-fem.io.macroGridFile_3d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/nswaves_3d.dgf
-#fem.io.macroGridFile_3d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/dkershaw08.msh.dgf
-#fem.io.macroGridFile_3d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/RandMesh4.msh.dgf
+fem.io.macroGridFile_1d:  ../grids/nswaves_1d.dgf
+fem.io.macroGridFile_2d:  ../grids/nswaves_2d.dgf
+#fem.io.macroGridFile_2d: ../grids/mesh4_1_2.typ1.dgf
+#fem.io.macroGridFile_2d: ../grids/mesh4_1_1.typ1.dgf
+#fem.io.macroGridFile_2d: ../grids/nswaves_2d_unstr.dgf
+fem.io.macroGridFile_3d:  ../grids/nswaves_3d.dgf
+#fem.io.macroGridFile_3d: ../grids/dkershaw08.msh.dgf
+#fem.io.macroGridFile_3d: ../grids/RandMesh4.msh.dgf
 
 
 # SOLVER CONFIGURATION
 #---------------------
 
-paramfile: ${CMAKE_CURRENT_SOURCE_DIR}/../parameter/paramSolver
+paramfile: ../parameter/paramSolver
 

dune/fem-dg/test/poisson/parameter.in

+# specify directory for data output (is created if not exists)
+fem.prefix: ${CMAKE_CURRENT_SOURCE_DIR}/data
+fem.prefix.input: ${CMAKE_CURRENT_SOURCE_DIR}
+# prefix data data files 
+fem.io.datafileprefix: solution
+# if you want to add time stemp to eoc file name
+# # to avoid overwriting the eoc files
+fem.io.eocFileTimeStamp: 0
+
 femhowto.eocSteps: 30
 UseBlocking: 0
 
@@ -31,12 +40,12 @@ fem.solver.matrixfilename: matrixfile
 
 # macro grid file
 
-fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/unitcube2.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/nonaffine.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/corner_cube.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/corner.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/corner_green.dgf
-#fem.io.macroGridFile_2d: ${CMAKE_CURRENT_SOURCE_DIR}/../grids/corner_red.dgf
+fem.io.macroGridFile_2d: ../grids/unitcube2.dgf
+#fem.io.macroGridFile_2d:../grids/nonaffine.dgf
+#fem.io.macroGridFile_2d:../grids/corner_cube.dgf
+#fem.io.macroGridFile_2d:../grids/corner.dgf
+#fem.io.macroGridFile_2d:../grids/corner_green.dgf
+#fem.io.macroGridFile_2d:../grids/corner_red.dgf
 
 
 femhowto.epsilon: 0.1
@@ -66,13 +75,6 @@ femhowto.startLevel: 0
 
 # number of EOC steps 
 
-# specify directory for data output (is created if not exists)
-fem.prefix: ${CMAKE_CURRENT_SOURCE_DIR}/data
-# prefix data data files 
-fem.io.datafileprefix: solution
-# if you want to add time stemp to eoc file name
-# # to avoid overwriting the eoc files
-fem.io.eocFileTimeStamp: 0
 
 # output format: grape | vtk-cell | vtk-vertex (projected in DG case),  sub-vtk-cell
 fem.io.outputformat: vtk-cell
@@ -84,7 +86,7 @@ fem.io.grapedisplay: 0
 # the end time along given line
 femhowto.sampleAlongLine: 0
 
-paramfile: solverparameter
+paramfile: ../parameter/paramSolver
 
 poisson.nonConformOrigin: false